RN Anti Pulse RESISTORS

FEATURES
■ High working Voltage,High stability.
■ Suitable for electronic ballast
DERATING CURVE
DIMENSIONS

Type | Rtated power | L±1 | ΦD±0.5 | φd±0.05 | Remark |
RI40 | 0.25W | 6.8 | 2.4 | 0.5 | |
0.5W | 9.8 | 3.5 | 0.55 | ||
1W | 11.5 | 4.5 | 0.65 | ||
2W | 15.5 | 5.2 | 0.75 |
|
RATINGS
Type | Rtated power(W) | Resistance Range | Resistance tolerance |
Max. Working |
Max. Overload |
Voltage Proof |
RN | 1/4W | 100Ω-820K |
±1% |
750V | 1000V | 500 |
1/2W | 1000V | 1500V | 600 | |||
1W | 1500V | 2000V | 700 | |||
2W | 2500V | 3000V | 800 |
Rated Ambient Temperature :+70℃
Operating Temperature Range:-55℃~+155℃
Rated voltage = √Power Rating×Resistance value or Max. working voltage, whichever is lower.
ELECTRICAL PERFORMANCE
Test Items | Performance Requirements | Test Methods | ||||||||||||||||||
Voltage Proof | No,breakdown or flashover | Wrapping foil method、applied voltage see above ratings table、1 min±5S | ||||||||||||||||||
Short Time Overload | △R≤±(1%R+0.05Ω) | 2.5 times rated voltage or Max. overload voltage , whichever is lower, for 5s. | ||||||||||||||||||
Solderability | Over 95% of area wire covered with solder | 260±10℃、2±0.5S | ||||||||||||||||||
Robustness of Terminations | △R≤±(1%R+0.05Ω) | Tensile:10N、10±1S Bending:2×90° Torsion:2×180° | ||||||||||||||||||
Resistance to soldering heat | △R≤±(1%R+0.05Ω) | 260±10℃、10±1S or 350±5℃ 3.5±0.5S | ||||||||||||||||||
Rapid change temperature | △R≤±(1%R+0.05Ω) | -55±3℃、30min; 155±3℃、30min 5 cycles | ||||||||||||||||||
Intermittent overload | △R≤±(5%R+0.1Ω) | 2.5 times of rated voltage for 1S ON,25S OFF;10000 cycles. | ||||||||||||||||||
Temperature Coefficient | TCR≤±350PPM/℃ | Room Temperature +100℃、and keep on 30~40min | ||||||||||||||||||
Endurance | △R≤±(5%R+0.1Ω) | 70±2℃、1000h,Rated direct voltage 1.5h ON、0.5h OFF cycles. | ||||||||||||||||||
Unexpected overload | Net-shaped tube dose not catch fire | 16、25 rated power voltage,keep on 5±0.5min; | ||||||||||||||||||
Damp Heat Steady State | △R≤±(5%R+0.1Ω) | 40±2℃、90~95%RH、56 days. | ||||||||||||||||||
Anti-surge characteristics | △R≤±(10%R+0.1Ω) |
Discharge test : According to the following table applied voltage, Charging for 4.5 S and discharge for 0.5 S, for 50 times impact test.
|